Parts & Accessories

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars BMW - X4 5-dr SUV with Normal Roof 2015 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles. - Enables transportation of bikes with 20x110 mm thru-axle forks

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars NISSAN - Juke 5-dr SUV with Normal Roof 2011 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars AUDI - A3 4-dr Sedan with Normal Roof 2014 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars KIA - Optima 4-dr Sedan with Normal Roof 2016 - 2019

An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish

Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included

Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

We made hauling from home to vehicle to anywhere a snap with the EXO WarriorWheels—wheels and a handle that connect to your EXO GearWarrior, even while it's still on your hitch. Simply snap it together and wheel your gear to wherever you're headed next, whether it's basecamp, the beach or the marina. - Connects to the EXO GearWarrior (or other Warrior baskets) in minutes without tools - All-terrain tires maneuver well over all types of surfaces and handle curbs and roots with ease - Roll up to 110 lbs. of gear to your camp or soccer practice - Large easy to grab handle is positioned to allow for maximum control when going downhill - 2 Year Warranty - Not intended to remain installed during vehicle transport Product Specs: - Weight: 18.50 lbs. - Dimensions: L 64.00 in x W 21.00 in x H 39.00 in - Limited Two Year Warranty

Replacement lock cores Kuat Racks lock systems. Comes with lock cores, keys, and 1 core removal tool. This part is not made for Kuat's NV rack, Sherpa rack, or any other hitch mounted rack.

Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.

Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.

Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included

Modifies women's bike frames as well as BMX and non-standard frames to be carried on a hanging-style hitch and strap mount bike racks. Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX, and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. Features: - Telescopic adjustment (18" - 30.5”) fits most bike frames - New push button clamps for quick installation and removal - Molded rubber pads protect the bike finish - Thule Frame Adapter 982XT - Keeps bike securely centered and mounted on hanging-style rear mounts - Durable rubber collars secure easily and safely to bike stem and seat post

A straight-forward, easy-to-use, locking QR skewer that fits any fork-style bike mount on the market. Compatible with any 9mm x 100mm axles. - Durable stainless steel axle and body - Easy-to-adjust end nut and cam lever - Lockable with SKS lock, sold separately

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty