Car Racks

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Long gone are the days when your vehicle's spare tire gets in the way of an epic bike trip. This handy little extension adds 7.25 inches to a 2-inch hitch receiver, giving you the clearance to attach just about any 2-inch bike rack. We're looking at you Broncos, Wranglers, and G-wagons. - Extends your 2" hitch receiver by 7 1/4" - Secures to any 2" hitch receiver using a threaded pin - Heavy-duty steel construction - Provides clearance to most spare tires; please measure your spare tire before hand - Compatible with the following Yakima Hitch Racks: Dr. Tray, OnRamp, HoldUp EVO, HoldUp, TwoTimer, HangOver 4, FullSwing, LongHaul, RoadTrip, EXO System Product Specs: - Weight: 8.63 lbs. - Dimensions: L 12.75 in x W 3.00 in x H 3.00 in - Limited Lifetime Warranty

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

Fully adjustable, upright bike carrier designed for the inside of the truck bed. Features - Quickly secure the bike without frame contact using the ratcheting arm - Ideal for carbon frames, mountain, downhill, ebikes and fat bikes - Accomodates wheel sizes from 20 - 29" and up to 5" tire - Lock bike to rack using Thule's One-Key system (lock included) - Holds 1 bike up to 50lbs - Fits all pickup tailgates - No bolting or drilling required Technical specifications - Max number of bikes: 1 - Dimensions: 40.6 x 18 x 6.7 in - Weight: 11 lb - One Key System compatible

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Premium trunk-mount bike carrier with raised platform designed to keep the rear lights and license plate visible, and fits wide range of vehicles including those with a spoiler. - Maximum fastening security to your vehicle with steel cables - Quick and easy mounting to car thanks to simple user interface and intuitive torque-limiting tightening system - Firm carrier hold and vehicle protection with twin hook attachment and rubber protection pads - Improved visibility of rear lights and license plate with raised platform design - Easy mounting of bikes with adjustable/removable bike arms and Thule AcuTight torque limiter knobs that click when optimal torque is reached - Accommodates up to 127cm/50" wheelbase bikes - Simple to fasten wheels, thanks to long wheel straps with pump buckles - Locks the bike to the bike rack and the bike rack to the roof racks (locks included) - Folds flat for easy transport and convenient storage - No assembly required - Possible to open vehicle trunk without any mounted bikes Technical specifications - Max number of bikes: 2 - Load capacity: 66 lb - Max bike weight: 33 lb - Dimensions: 23 x 50 x 47 in - Folded dimensions: 9.4 x 30.7 x 21.3 in - Weight: 27.6 lb - Carbon frame compatible - Rear lights and number plate visible with bikes mounted - One Key System compatible - Lockable bike-to-rack - Lockable rack-to-vehicle

Transporting tandems has never been easier than with Thule’s Tandem Bike Mount. Its unique pivoting fork mount allows fast, easy, one-person loading and it easily converts to carry single bikes. Boasting a corrosion-resistant aluminum tray, the Tandem Bike Mount includes tough nylon clamps and a stainless-steel skewer, too. It fits on square and round crossbars (sold separately).

Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.

Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.

What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Whether you've invited more friends for an epic ride or can’t decide which rig to take to the trails, the MTR 1-Bike Add-On has you covered. Compatible with both the MTR 1-bike and 2-bike hitch rack, these add-on trays save you the hassle of buying a new rack to haul more bikes. Built with the same robust materials as the MTR rack, these add-on trays are ready to roll out of the box and are the soul of the Modular Tray Rack (MTR) functionality. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 1 bike, up to 60 lb when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, tray can hold a bike up to 35 lb. - Minimal assembly required. - Rack weight: 30 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.

Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.

With its robust construction, eye-catching style and compact design that carries both bikes on a single bar, the SuperClamp is your bike’s new BFF. This lightweight – yet mighty – platform hitch rack is ready to hit the road at a moment’s notice. Whether you’re hauling eBikes, beefy mountain bikes, your prized TT rig, or an assortment of bicycles, the SuperClamp’s dual shepherd’s hooks promise all bikes a truly secure ride without touching the bike’s frame. And thanks to the SuperClamp’s tilting feature, no more unloading bikes to let the dog out of the back. Simply tilt down and release the hounds. Top it all off with integrated locks, a built-in bottle opener and head-turning reflectors, the SuperClamp 2-bike is proof that you can have your cake and eat it too. - Fastest loading bike rack around thanks to the dual wheel-clamping hooks (bonus: no frame contact). - Lightweight, yet mighty! Weighs only 35 lb, and is rugged enough to carry 2 bikes, up to 60 lb each. - Features integrated locks and reflectors for extra security and visibility, day and night. - Open Sesame! Tilting feature allows hatch access, even when fully loaded, and folds up when not in use. - Sleek and compact design holds 2 bikes on a single bar.

Swing into Action Turn your Saris hitch rack into a swing away with this hitch rack accessory. Featuring 90° of pivot, the Swing Away Accessory gives you free and clear hatch access without removing your bikes. Designed to handle up to 250 lb. of rack plus bike weight, the Swing Away Accessory is compatible with our most popular hitch racks – including the Freedom and SuperClamp platform hitch racks. Convenient and built-in carrying handles make it easy to maneuver and install, while the included Hitch Tightener ensures secure travels down the road. For those times when only a swing away will do, there’s the Saris Swing Away Accessory. Product Features - Turns your favorite Saris hitch rack into a swing away. - Pivots 90° and locks in open position. - Carries up to 250 lb. of rack + bike weight. - For use with 2” receivers only. - For specific rack model compatibility see specifications below. Rack Compatibility - Compatibility information for Saris hitch racks - Compatible with bikes up to 35 lb. per bike tray for the following models: - SuperClamp EX 2-Bike (4025F) - SuperClamp HD 2-Bike (4025HD) - Freedom EX 2-Bike (4412F) - Freedom 2-Bike (4412B) - Glide EX 4-Bike (774) - Compatible with bikes up to 60 lb. per bike tray for the following models: - MTR 1-Bike (4031) - MTR 2-Bike (4032) - Tilting/folding feature of Freedom, SuperClamp or MTR racks can be used when on the Swing Away Accessory in the "closed" position. - Gliding feature of the Glide EX is not recommended when installed on Swing Away in the "closed" or "open" (swung away) position. - Check with your hitch rack manufacturer (non Saris) to see if your existing hitch rack can be used with extenders. Product Design - Swings away to 90° for full vehicle hatch access. - For use with 2” receivers only. - Weight capacity: 250 lb. (rack, plus bikes). - Hitch Tightener system securely locks hitch into place, securing the base to your vehicle. - Two integrated carrying handles.

Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.

For 2" hitches, this extension gives you more clearance for your bike rack or trailer away from the vehicle. The insert tube is threaded, by bolting in the extension, you get rid of 80% of the play and rattle vs extensions that use a pin. Included is the 8" extension, hitch bolt, and lock pod. Allows BackStage, MonoRail & SplitRail racks to fold flat on Wrangler and other cars with spare tires. Works well with all bike racks including Thule, Yakima, and Kuat. As with all hitch extensions, they lower weight ratings by 50%, confirm you are within specifications before use. - Electroplated plus powdercoat for best rust resistance - Welded steel construction - Includes lock, two keys & wrench for installation - Fits 2" Hitches only - Maximum Trailer Weight- Lower amount of 3500 lbs OR 50% maximum listed on your trailer hitch - Maximum Tongue Weight- Lower amount of 350 lbs or 50% of maximum listed on your hitch. (For use with bicycles, Tongue Weight is your guide, not Trailer Weight)

The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

Shuttle Saver - Our new T2 pad is made to fit any shape of tailgate, and has an adjustable rear camera panel - both RF exclusive, patent pending features. Carry up to 6 bikes with no bike on bike crime with raised bumpers + downtube straps. Backup Plan - Exclusive to the T2 is the adjustable rear panel that allows for easy adaptation to any rear camera + handle position. Shape Shifter - Six adjustment straps along top edge of the installed pad provide a fit tailored to your tailgate’s shape - even curved! Just Say No - To bike on bike crime. The T2 features raised bumpers in the truck box that keep frame downtubes in place and secure, minimizing contact while shuttling. Specs - Construction: PVC tarpaulin with micro-brushed inner lining - Adjustment: Top edge adjustment, camera window adjustment - Other: Raised bike spacers and padding, hook-and-loop frame straps, lock loop Bike Capacity - Mid-Size Truck (Tacoma or similar): 5-bike - Full-Size Truck (Ford F-150, F-350 or similar): 6-bike

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

Küat Hitch Adapter 2.5" to 2"

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Lightweight, durable, and portable—Kuat's Beta is no-frills and full of function. It features an anti-wobble cam at the hitch, and a anti-wobble adjustment at the arms for a locked-down, solid ride. Anti-Sway cradles keep your bikes in line for a smooth ride down the road. The 11-pound Beta folds flat, so you can stash it in the back of a car or behind the seat of a pickup and have it ready when you need it. Features - Carries 2 bikes (up to 40 lbs. each) - Total carrying capacity of up to 80 lbs. - Folds up quickly for storage - Tilts down for easy vehicle access - Enhance the Beta with hitch lock system (sold separately) - Hand-tight cam system - no need for additional tools! - Anti-sway carriages for a smooth ride - Aluminum construction is lightweight and extremely durable Specs •Weighs only 11 lbs •Available for 2" OR 1.25" receivers. The 1.25" Beta can fit either receiver with an adapter (sold separately).

Kuat's Beta is a lean, mean rack that carries two bikes (up to 80 lbs. total capacity) and weighs in at just under 14 lbs. - Carries 2 bikes (up to 40 lbs. each) - Total carrying capacity of up to 80 lbs. - Folds up quickly for storage - Tilts down for easy vehicle access - Enhance the Beta with hitch lock system (sold separately) - Hand-tight cam system - no need for additional tools! - Anti-sway carriages for a smooth ride - Aluminum construction is lightweight and extremely durable - Gun Metal Gray powder coat finish - 2-inch weighs only 12 lbs. (lightest weight on the market) - 1.25-inch weighs only 14 lbs. (additional 2lbs due to steel lower end) - Available for 2-inch OR 1.25-inch receivers. The 1.25-inch Beta can fit either hitch size with the 1.25-inch to 2-inch adapter.

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.